Upholstered bed frames – Measure the length and width of your mattress. Add 1 foot for each of these measurements. Cut two of its tables 2 10 to the width measuring 1 foot. Cut two pieces of 2-by-10 to match the length measuring more than 1 ft. Place these cards in a stack labeled frame boards. Cut the boards to a length of about ½ inch shorter than the width measurement set determined in the previous step. Cut the remaining 2-by-10 about ½ inch shorter than the measurement length plus 1 foot recorded in the previous step.
Take one of the tables frame. Covering the front of the card with a layer of spray adhesive. Cut a piece of batting equal to the length of the board and about 4 inches wider than the width of the table. Place the adhesive side down in the batting table. Wrap the batting to the back of the board, as you would wrap a gift. Staple the batting in place. Repeat with remaining Upholstered bed frames joints.
Build your Upholstered bed frames on the floor of his bedroom. Put your boards framework with joints adjusted width at top and bottom. Place adjusted length boards on the right and left to form a rectangle. Cover the ends of each board with a thin layer of wood glue. Use clamps to hold the boards together. Allow the glue to dry completely.